Traffic Signal and ITS Standard Specifications & Details

The following document contains standard details and specifications for the design and
construction of traffic signals and intelligent transportation systems (ITS) within the City
of Glendale, Arizona. Signed copies of the included drawings are available at the City of
Glendale Transportation Department, 5800 W. Glenn Dr. Suite 315, Glendale, Arizona,
85301; 623-930-2940.

• Standard Specifications
  CLICK HERE to download the entire document (pdf).
  
  
• Standard Details
  CLICK HERE to download the entire document (pdf)

---

Individual Standard Details

SECTION 1: INTRODUCTION		Revised
	T1-1:  TABLE OF CONTENTS	2/2008
	T1-2:  LEGEND OF COMMONLY USED SYMBOLS AND LINETYPES	2/2008
	T1-3:  LEGEND OF COMMONLY USED ABBREVIATIONS	6/2007
SECTION 2: PULL BOXES AND CONDUIT		Revised
	T2-1:   NO. 1 AND NO. 1.5 PULL BOXES	6/2007
	T2-2:  NO. 3.5 PULL BOX	6/2007
	T2-3:  NO. 3.5 FIBRELYTE PULL BOX	6/2007
	T2-4:  NO. 5 PULL BOX	6/2007
	T2-5:  NO. 5 FIBRELYTE PULL BOX	6/2007
	T2-6:  NO. 7 PULL BOX	6/2007
	T2-7:  NO. 7 FIBRELYTE PULL BOX	6/2007
	T2-8:  NO. 8 PULL BOX	6/2007
	T2-9:  NO. 9 PULL BOX	2/2008
	T2-10:  TYPICAL PULL BOX INSTALLATION NO. 7 AND NO. 7E PULL BOXES	6/2007
	T2-11:  NO. 9 PULL BOX WIRING AND SPLICING DETAIL	6/2007
	T2-12:  TYPICAL SIGNAL CONDUIT DETAILS	2/2008
	T2-13:  ITS TRENCH DETAIL UNDER ASPHALTIC PAVEMENT	6/2007
	T2-14:  ITS TRENCH DETAIL IN UNPAVED AREAS	6/2007
	T2-15:  COMMUNICATION CONDUIT CROSSING OVER EXISTING UTILITY	6/2007
	T2-16:  COMMUNICATION CONDUIT CROSSING UNDER EXISTING UTILITY	6/2007
	T2-17:  COMMUNICATION CONDUIT CROSSING UNDER SRP IRRIGATION LINE	6/2007
	T2-18:  BORED CONDUIT INSTALLATION	6/2007
	T2-19:  TYPICAL ITS PULL BOX AND CONDUIT LOCATIONS	6/2007
	T2-20:  ITS Trench Detail New Pavement Construction Over Existing ITS Facilities	1/2009
SECTION 3: FOUNDATIONS		Revised
	T3-1:  FOUNDATION BASE FOR 8 PHASE CONTROLLER	6/2007
	T3-2:  FOUNDATION FOR SIGNAL POLES	2/2008
	T3-3:  SERVICE/UPS FOUNDATION	6/2007
SECTION 4: CABINETS		Revised
	T4-1:  SIGNAL CONTROL CABINET SHELL	6/2007
SECTION 5: SIGNAL POLES AND MAST ARMS		Revised
	T5-1:  TYPE Q104 SIGNAL POLE AND MAST ARM	2/2008
	T5-2:  TYPE Q106 SIGNAL POLE AND MAST ARM	2/2008
	T5-3:  TYPE Q108 SIGNAL POLE AND MAST ARM	2/2008
	T5-4:  TYPE Q114 SIGNAL POLE AND MAST ARM	2/2008
	T5-5:  TYPE Q116 SIGNAL POLE AND MAST ARM	2/2008
	T5-6:  MODIFIED TYPE Q114 OR Q116 POLE FOR CCTV	2/2008
	T5-7:  SIGNAL POLE EXTREMITY ORIENTATION	2/2008
	T5-8:  SIGNAL POLE DRILLING DETAILS	2/2008
	T5-9:  SIGNAL EQUIPMENT ORIENTATION	2/2008
	T5-10:  HAND HOLE DETAIL	2/2008
	T5-11:  SIGNAL POLE BASE/SIGNAL ARM EXTENSION WELD	2/2008
	T5-12:  SIGNAL ARM TENON/SIGNAL POLE BASE PLATE/LUMINAIRE SHOEING	2/2008
	T5-13:  ROTATABLE MAST ARM CLAMP	2/2008
	T5-14:  TWO PIECE BASE COVER	2/2008
SECTION 6: LOOP/PRESENCE DETECTION		Revised
	T6-1:  LOOP DETECTOR INSTALLATION	6/2007
	T6-2:  LOOP DETECTOR INSTALLATION LOCATION	6/2007
	T6-3:  LOOP DETECTOR INSTALLATION WITH MANHOLE CONFLICT	6/2007
	T6-4:  OVERHEAD PRESENCE DETECTION	6/2007
SECTION 7: SIGNAL HEADS		Revised
	T7-1:  STANDARD SIGNAL FACES	6/2007
	T7-2:  VISORS FOR 12” SIGNALS	6/2007
SECTION 8: SIGNAL HEAD MOUNTING		Revised
	T8-1:  TYPE II MOUNTING ASSEMBLY	6/2007
	T8-2:  TYPE V MOUNTING ASSEMBLY	6/2007
	T8-3:  TYPE VII MOUNTING ASSEMBLY	6/2007
	T8-4:  VERTICAL SIGNAL HANGER	6/2007
SECTION 9: MOUNTING CASTINGS – SIGNAL		Revised
	T9-1:  TERMINAL COMPARTMENT SIDE MOUNTED	6/2007
	T9-2:  POLE PLATE DETAIL	6/2007
	T9-3:  MISCELLANEOUS ASSEMBLY PARTS	6/2007
	T9-4:  MAST ARM PLUMBIZER	6/2007
SECTION 10: PEDESTRIAN FIXTURE DETAILS		Revised
	T10-1:  PEDESTRIAN PUSH BUTTON SIGN	6/2007
	T10-2:  TYPE II PEDESTRIAN PUSH BUTTON	6/2007
	T10-3:  PEDESTRIAN INDICATION (SOLID IMAGE)	6/2007
SECTION 11: STANDARD POLE LOCATIONS		Revised
	T11-1:  CONDUIT AND POLE BASE INSTALLATION MAJOR ARTERIAL INTERSECTION	6/2007
	T11-2:  CONDUIT AND POLE BASE INSTALLATION CORNER DIMENSIONS	2/2008
SECTION 12: TRAFFIC SIGNAL EQUIPMENT		Revised
	T12-1:  WIRING DIAGRAM	2/2008
	T12-2:  PHASING DIAGRAM	6/2007
	T12-3:  PHASING DIAGRAM WITH LEFT TURN PHASING	6/2007
SECTION 13: ITS COMMUNICATIONS		Revised
	T13-1:   EXAMPLE SPLICE DIAGRAM	6/2007
	T13-2:   EXAMPLE BLOCK SYSTEM DIAGRAM	6/2007
	T13-3:  CCTV FIELD EQUIPMENT	6/2007
	T13-4:  DMS CANTILEVER SIGN STRUCTURE	6/2007